11472
Comment:
|
12728
fix monitoring link
|
Deletions are marked like this. | Additions are marked like this. |
Line 8: | Line 8: |
There are 3 dedicated parallel clusters (blade centers, Miriquid compute nodes) available for running parallel applications, but you can also run parallel MPI jobs in the SGE farm. The documentation in [[https://dv-zeuthen.desy.de/services/batch/|Batch System Usage]] applies there. | There are 4 dedicated parallel clusters (blade centers, Miriquid compute nodes) available for running parallel applications, but you can also run parallel MPI jobs in the SGE farm. The documentation in [[https://dv-zeuthen.desy.de/services/batch/|Batch System Usage]] applies there. |
Line 13: | Line 13: |
The batch part consists of three separate partitions that are not interconnected: pax11 (broadwell) and pax10 (haswell) each consist of 32 compute nodes, connected via a FDR Infiniband network.The older system is pax9 (sandybridge), 16 nodes connected by a QDR Infiniband network. | The batch part consists of four separate partitions that are not interconnected: pax12 (rome) has 16 nodes and HDR Infiniband, pax11 (broadwell) and pax10 (haswell) each consist of 32 compute nodes, connected via a FDR Infiniband network.The legacy system is pax9 (sandybridge), 16 nodes connected by a QDR Infiniband network. |
Line 16: | Line 16: |
All nodes have two CPUs (sockets). | All Intel nodes have two CPUs (sockets), while the AMD machines have only one. |
Line 21: | Line 21: |
||pax12-[00-15]||AMD EPYC 7702P 64-Core Processor @ 2GHz||Rome||64||256G|| | |
Line 23: | Line 24: |
The pax machines have a software environment that is slightly different from the normal installation, it includes the OpenHPC software stack and a different version of the {{{module}}} command. To build on any machine in the right environment, run the {{{/project/singularity/images/pax.img}}} image. You can submit batch jobs on SL7 WGS, e.g. the machine named sl7. | The pax machines have a software environment that is slightly different from the normal installation, it includes the OpenHPC software stack and a different version of the {{{module}}} command. To build on any machine in the right environment, run the {{{/project/singularity/images/pax.img}}} image. You can submit your jobs if you run the singularity container on a EL7 WGS like this: {{{ singularity run -B /var/run/munge /project/singularity/images/pax.img }}} You can also submit your jobs from the machine pax9-00. |
Line 35: | Line 41: |
||intel ||19.0.3 || || | ||gnu9||9.3.0 || || ||intel ||2021.2|| || ||hdf5||1.10.1||gnu|| |
Line 38: | Line 46: |
||openmpi3||3.1.3||gnu8/intel|| | ||openmpi3||3.1.4||gnu8/intel|| ||openmpi4||4.0.5||gnu8/gnu9/intel|| |
Line 40: | Line 49: |
||mvapich2 || 2.3||gnu8/intel|| | ||mvapich2 || 2.3.2||gnu8/intel|| ||impi||2021.1||gnu/gnu8/intel|| |
Line 42: | Line 52: |
||opencoarrays||2.3.1||gnu7/gnu8 openmpi3|| | ||opencoarrays||2.3.1||gnu7 openmpi3|| ||opencoarrays||2.8.0||gnu8 openmpi3|| |
Line 78: | Line 89: |
==== Intel MPI ==== To use Intel MPI, add a compiler module followed by impi. Use the compiler wrappers like 'mpicc' and 'mpif90' for GNU or 'mpiicc' and 'mpiifort' for the Intel compiler. To run the resulting application, set the environment variable like this: {{{ export FI_PROVIDER=verbs }}} In a Slurm job, please use the prun wrapper to start your application. |
|
Line 126: | Line 144: |
=== pax10 and pax11 I/O nodes === Most of the pax10 and pax11 machines have external 1GB/s Ethernet connections to the storage. To allow faster storage access, four machines each in the pax10 and pax11 partitions are equipped with 10GB/s Ethernet instead. To access them, you'll have to request the 10g feature in Slurm: {{{ --constraint=10g*1}}}. That way, the first process, the one executing the job scripts, will run on one of the machines with faster connectivity. |
=== I/O nodes === Most of the pax10 and pax11 machines have external 1GB/s Ethernet connections to the storage. To allow faster storage access, four machines each in the pax10 and pax11 partitions are equipped with 10GB/s Ethernet instead. To access them, you'll have to request the 10g feature in Slurm: {{{ --constraint=10g*1}}}. That way, the first process, the one executing the job scripts, will run on one of the machines with faster connectivity. All pax12 machines have 10GB/s Ethernet as well. === Partitions and backfilling === The cluster consists of four separate partitions: broadwell (default, alias pax), rome, haswell and sandybridge. Jobs can run on only one type of node. The special partition backfill is used for filling up otherwise empty nodes. Jobs running there are automatically terminated by slurm if another job on the main partition needs the nodes. |
Line 131: | Line 153: |
The 'module' command was replaced by a different, more powerful implementation called lmod. It doesn't list all available module, instead it supports dependent modules, e.g. the MPI implementations build with 'gnu7' are shown after {{{module add gnu7}}}. | The 'module' command was replaced by a different, more powerful implementation called lmod. It doesn't list all available modules, instead it supports dependent modules, e.g. the MPI implementations build with 'gnu7' are shown after {{{module add gnu7}}}. |
Line 150: | Line 172: |
The software installation is based on the [[http://openhpc.community|OpenHPC project]]. We provide only a subset of the available software. If you need any of the other [[https://github.com/openhpc/ohpc/wiki/Component-List-v1.3.5|available components]], send a request to zn-cluster@desy.de | The software installation is based on the [[http://openhpc.community|OpenHPC project]]. We provide only a subset of the available software. If you need any of the other [[https://github.com/openhpc/ohpc/wiki/Component-List-v1.3.9|available components]], send a request to zn-cluster@desy.de |
Line 156: | Line 178: |
Ganglia provides a web monitoring interface. These pages are only available from the internal network. | Ganglia provides a web monitoring interface. These page is only available from the internal network. |
Line 158: | Line 180: |
[[http://ganglia.zeuthen.desy.de/ganglia/?c=Parallel%20Clusters&m=load_one&r=hour&s=descending&hc=4&mc=2|interactive machines]] [[http://ganglia.zeuthen.desy.de/ganglia/?c=Slurm%20PAX%20farm&m=load_one&r=hour&s=descending&hc=4&mc=2|parallel batch machines]] | [[http://ganglia.zeuthen.desy.de/ganglia/?c=Slurm%20PAX%20farm&m=load_one&r=hour&s=descending&hc=4&mc=2|Parallel Batch Machines]] |
Line 169: | Line 191: |
1. There are some compatibility problems between third-party module files (e.g. Intel 2021) and the module command. |
This web page will no longer be updated. Please use this link for current information.
Usage of the Linux Clusters at DESY Zeuthen
Contents
Introduction
There are 4 dedicated parallel clusters (blade centers, Miriquid compute nodes) available for running parallel applications, but you can also run parallel MPI jobs in the SGE farm. The documentation in Batch System Usage applies there.
For discussions and information regarding the usage of the PAX cluster a mailing list has been introduced: <zn-cluster AT desy DOT de>. To get subscribed to that list, send an email to <sympa AT desy DOT de> with the subject: subscribe zn-cluster
Hardware
The batch part consists of four separate partitions that are not interconnected: pax12 (rome) has 16 nodes and HDR Infiniband, pax11 (broadwell) and pax10 (haswell) each consist of 32 compute nodes, connected via a FDR Infiniband network.The legacy system is pax9 (sandybridge), 16 nodes connected by a QDR Infiniband network.
Nodes
All Intel nodes have two CPUs (sockets), while the AMD machines have only one.
Name |
CPU |
Code Name |
Cores |
Memory |
pax9-[00-15] |
Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz |
Sandybridge |
8 |
48G |
pax10-[00-31] |
Intel(R) Xeon(R) CPU E5-2640 v3 @ 2.60GHz |
Haswell |
8 |
64G |
pax11-[00-31] |
Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz |
Broadwell |
16 |
128G |
pax12-[00-15] |
AMD EPYC 7702P 64-Core Processor @ 2GHz |
Rome |
64 |
256G |
Software Environment
The pax machines have a software environment that is slightly different from the normal installation, it includes the OpenHPC software stack and a different version of the module command. To build on any machine in the right environment, run the /project/singularity/images/pax.img image. You can submit your jobs if you run the singularity container on a EL7 WGS like this:
singularity run -B /var/run/munge /project/singularity/images/pax.img
You can also submit your jobs from the machine pax9-00.
Building Applications
Use the 'module' command to first add a compiler implementation and then a version of MPI to your path e.g.:
module add gnu mvapich2
OpenHPC provides the module command from the lmod project. It supports more features then the old environment-modules, including dependent modules, that are shown only after loading the prequisites, e.g. for openmpi you'll have to load the intel module first.
module name |
version |
depends on |
gnu |
5.4.0 |
|
gnu7 |
7.3.0 |
|
gnu8 |
8.3.0 |
|
gnu9 |
9.3.0 |
|
intel |
2021.2 |
|
hdf5 |
1.10.1 |
gnu |
openmpi |
1.10.7 |
gnu/intel |
openmpi3 |
3.1.0 |
gnu7 |
openmpi3 |
3.1.4 |
gnu8/intel |
openmpi4 |
4.0.5 |
gnu8/gnu9/intel |
mvapich2 |
2.2 |
gnu/gnu7 |
mvapich2 |
2.3.2 |
gnu8/intel |
impi |
2021.1 |
gnu/gnu8/intel |
opencoarrays |
1.8.11 |
|
opencoarrays |
2.3.1 |
gnu7 openmpi3 |
opencoarrays |
2.8.0 |
gnu8 openmpi3 |
Interactive tests
You can run interactive jobs in Slurm after allocating nodes with salloc, e.g.: salloc -p sandybridge -N 2 -c 2. To get an interactive shell on the allocated machines, use the command srun --pty bash.
OpenMPI
To run an MPI program outside the batch system, you must specify a machinefile listing all the machines and the number of cores your application should run on. A typical machine file looks like this:
pax8a slots=8 pax8b slots=8 pax8c slots=8 pax8d slots=8
The command line would look like this:
/opt/ohpc/pub/mpi/openmpi-gnu/1.10.7/bin/mpirun -np 32 -machinefile ./machinefile ./program
More information on openmpi is in the openmpi FAQ: http://www.open-mpi.org/faq/
Mvapich2
To use mvapich2, add one of those versions to your path and compile your application with that mpi compiler. Applications built with mvapich2 can use only Infiniband network hardware, so they will work on the pax machines, but not on more than one farm machine or WGS.
The machine file format is different from the one for openmpi, you must list the host name for every core you want to use, e.g. if you want to run four processes, two processes on each of pax89 and pax88:
pax88 pax89 pax88 pax89
The preferred way to run a application with mvapich2 is mpiexec, e.g.:
/opt/ohpc/pub/mpi/mvapich2-intel/2.2/bin/mpiexec -n 4 -machinefile ./machinefile /opt/ohpc/pub/libs/intel/mvapich2/imb/2018.1/bin/IMB-MPI1
Intel MPI
To use Intel MPI, add a compiler module followed by impi. Use the compiler wrappers like 'mpicc' and 'mpif90' for GNU or 'mpiicc' and 'mpiifort' for the Intel compiler. To run the resulting application, set the environment variable like this:
export FI_PROVIDER=verbs
In a Slurm job, please use the prun wrapper to start your application.
Batch System Access
ATTENTION: The PAX is now based on the SLURM scheduling system.
Slurm Commands
The most important commands:
Information about the cluster |
|
Show current job list |
|
Parallel command execution |
|
Submit a batch job |
|
Reserve ressources for interactive commands |
|
Abort a job |
|
Graphical user interface to view and modify Slurm state |
|
Show accounting information |
Allocation
Slurm was configured to always schedule complete nodes to each job. The pax machines have hyperthreading enabled, each hardware thread is seen as a CPU core by Slurm, so by default, on a 32 core machine with hyperthreading, 64 MPI processes are assigned. To prevent that, use the option -c 2 for sbatch, salloc or srun.
Parallel Execution
Slurm has integrated execution support for parallel programs, replacing mpirun. To work around slight differences in needed options, use prun instead of srun for starting MPI application. You'll have to load the prun module first.
MPI Support
Before running MPI programs, the LD_LIBRARY_PATH variable must first be set, this is done by loading the right environment module, e.g. module add intel openmpi.
Job scripts
Parameters to slurm can be set on the sbatch command line or starting with a #SBATCH in the script. The most important parameters are:
-J |
job name |
--get-user-env |
copy environment variables |
-n |
number of cores |
-N |
number of nodes |
-t |
run time of the job, default is 30 minutes |
-A |
account, default the same as UNIX group |
-p |
partition of the cluster |
--mail-type |
configure email notifications, e.g. use --mail-type=ALL |
Be careful with --get-user-env, it will also copy loaded modules to the job.
Time format
The runtime of a job is given as minutes, hours, minutes and seconds (HH:MM:SS) or days and hours (DD-HH). The maximum run time was set to 48 hours.
Examples
An example job script is in slurm-mpi.job
Accounting
The jobs and their resources usage is stored in a database that is used for the fair share part of the scheduler. You can view your account's jobs with the command sacct. With no parameters,only today's jobs are shown, to view all jobs since May 1st, use the command sacct -S 2014-05-01 . To view jobs from other accounts as well, use the --allusers option.
Local Disk Space
Each node has a local directory /scratch with up to 1TB of space. It is cleared automatically at the end of the job.
I/O nodes
Most of the pax10 and pax11 machines have external 1GB/s Ethernet connections to the storage. To allow faster storage access, four machines each in the pax10 and pax11 partitions are equipped with 10GB/s Ethernet instead. To access them, you'll have to request the 10g feature in Slurm: --constraint=10g*1. That way, the first process, the one executing the job scripts, will run on one of the machines with faster connectivity. All pax12 machines have 10GB/s Ethernet as well.
Partitions and backfilling
The cluster consists of four separate partitions: broadwell (default, alias pax), rome, haswell and sandybridge. Jobs can run on only one type of node. The special partition backfill is used for filling up otherwise empty nodes. Jobs running there are automatically terminated by slurm if another job on the main partition needs the nodes.
SL7 changes
As the versions and paths of the MPI implementations have changed, programs are not compatible between SL6 and SL7. You should rebuild your application on SL7, but you could also try singularity.
The 'module' command was replaced by a different, more powerful implementation called lmod. It doesn't list all available modules, instead it supports dependent modules, e.g. the MPI implementations build with 'gnu7' are shown after module add gnu7.
Running EL6 software using Singularity
It is possible to run software built on EL6 in a Singularity container. This works with mvapich2 binaries by calling singularity in the batch script like this:
mpiexec singularity exec /project/singularity/images/SL6.img yourbinary
However, Mvapich2 2.2 isn't optimized yet for Singularity, so this is slower than running native programs.
For Openmpi, singularity is supported in Openmpi >= 2.1, that's why you'll have to rebuild your program with openmpi3 as installed in the SL6 singularity container:
singularity exec /project/singularity/images/SL6.img /usr/lib64/openmpi-3.0/bin/mpicc yourprog.c -o yourprog.sl6
and in the job script:
module add gnu7 openmpi3 prun prun singularity exec -B /scratch /project/singularity/images/SL6.img yourprog.sl6
Additional Software
The software installation is based on the OpenHPC project. We provide only a subset of the available software. If you need any of the other available components, send a request to zn-cluster@desy.de
AFS Access
The application binary must be available to all nodes, that's why it should be placed in an AFS or Lustre directory.
Monitoring
Ganglia provides a web monitoring interface. These page is only available from the internal network.
Known Issues
Openmpi3 has a bug that makes the program hang in certain situations: https://www.mail-archive.com/users@lists.open-mpi.org//msg31839.html Use openmpi instead.
- openmpi 1.10.x jobs crash on pax10-[28-31]. This is caused by the Mellanox Ethernet cards in these nodes. There are several workarounds:
- Use openmpi3 or mvapich2 when using these nodes
Exclude them with the -x pax10-[28-31] option to sbatch.
If you use only the nodes pax10-[28-31] with openmpi, exclude the default Infiniband device: set OMPI_MCA_btl_openib_if_exclude=mlx4_0:1
You need to acquire an addressless Kerberos ticket for Slurm to work. This is the default on supported DESY machines. On self-maintained machines like notebooks, simply set noaddresses=true in the file /etc/krb5.conf. To check if your ticket is addressless, call klist -v (Heimdal klist only).
The command sbcast cannot be used to copy a file to /scratch, as that is a bind mounted directory. Use /batch/job.${SLURM_JOB_ID}.0/scratch as target.
The module command might be unavailable for tcsh login shell users. As workaround, they can run bash -l and use the --get-user-env option in the job.
- There are some compatibility problems between third-party module files (e.g. Intel 2021) and the module command.
Further documentation
Paralleles Rechnen in Zeuthen - die neuen Cluster , 04/27/10, technical seminar
HPC-Clusters at DESY Zeuthen , 11/22/06, technical seminar