5489
Comment:
|
5510
converted to 1.6 markup
|
Deletions are marked like this. | Additions are marked like this. |
Line 3: | Line 3: |
[[TableOfContents]] | <<TableOfContents>> |
Line 29: | Line 29: |
set pendingipaddress=141.34.42.xyz set pendingipnetmask=255.255.255.0 set pendingipgateway=141.34.42.1 |
set pendingipaddress=141.34.73.xyz or 141.34.72.xyz set pendingipnetmask=255.255.254.0 set pendingipgateway=141.34.72.1 |
Line 38: | Line 38: |
See ["Remote Management"]. | See [[Remote_Management]]. |
Line 53: | Line 53: |
||<tablestyle="width: 100%; background-color: #FFAAAA;"> <!> Log in with ssh '''without exiting the current session''' to test the new password.[[BR]] There is no known method for a factory reset of the SP.|| | ||<tablestyle="width: 100%; background-color: #FFAAAA;"> <!> Log in with ssh '''without exiting the current session''' to test the new password.<<BR>> There is no known method for a factory reset of the SP.|| |
Line 59: | Line 59: |
in the restricted page ["Host Initialisation/Sun x4100/Secrets"]. | in the restricted page [[Host_Initialisation/Sun_x4100/Secrets]]. |
Line 107: | Line 107: |
set destination=141.34.32.37 | set destination=141.34.32.57 |
Line 123: | Line 123: |
* '''Legacy USB''' (default: enabled)[[BR]] | * '''Legacy USB''' (default: enabled)<<BR>> |
Line 128: | Line 128: |
* '''Chipset -> South``Bridge Configuration -> Restore on AC/Power Loss'''[[BR]] | * '''Chipset -> South``Bridge Configuration -> Restore on AC/Power Loss'''<<BR>> |
Line 131: | Line 131: |
* '''Advanced -> Remote Access Configuration''' (default: 9600 baud on ttys0)[[BR]] | * '''Advanced -> Remote Access Configuration''' (default: 9600 baud on ttys0)<<BR>> |
Contents
This documentation applies to Sun Fire X4500 (so called Thumper), too. |
Documentation
There's almost no documentation coming with the system, it's all available online only:
http://www.sun.com/products-n-solutions/hardware/docs/Servers/Workgroup_Servers/x4100/index.html
Getting the ILOM going is described in the Servers Setup Guide which is coming in printed form, though.
ILOM (Service Processor) Setup
To get the IP interface going without having dynamic DHCP for it available, use the serial port:
- find a notebook or a system nearby with a 9-pin SUB-D serial port
- attach the adaptor coming with the server to this port
use an RJ45 cable (a normal patch cable works) to connect the adaptor to the serial management port of the server
- fire up the terminal emulation software (linux: minicom) and configure the port correctly:
- 9600,8N1 (on a notebook, the port ist /dev/ttyS0, on a server it may be ttyS1)
no flow control, neither hardware nor software
- you should now be able to log in as root (password: changeme)
set the IP interface to a static address as described in the Servers Setup Guide:
cd /SP/network set pendingipaddress=141.34.73.xyz or 141.34.72.xyz set pendingipnetmask=255.255.254.0 set pendingipgateway=141.34.72.1 set pendingipdiscovery=static set commitpending=true
The last step takes a couple of seconds and produces some error messages. Don't panic. Verify if it worked by pinging the service processor afterwards. You should now be able to log in with ssh or https. All other steps can be done from your desktop.See Remote_Management.
Changing the Service Processor Password
Log in as root with ssh (initial password: changeme). Then:
-> set /SP/users/root password Changing password for user /SP/users/root/password... Enter new password: ******** Enter new password again: ******** New password was successfully set for user /SP/users/root
Changing the password is also possible on the SP's Website (User Management -> Select "root" and click "Edit").
Log in with ssh without exiting the current session to test the new password. |
Enabling Passwordless ssh Access
This is not foreseen by SUN, but all information needed to do it is publicly available. Anyway, since SUN may not appreciate public documentation of this little hack, it is documented in the restricted page Host_Initialisation/Sun_x4100/Secrets.
Host Information Retrieval
The information is retrieved by the use of ipmitool. Here's the script that's called ipmi (it has to be called on a host where ipmitool is available, e.g. a):
host=$1 shift ipmitool -I lan -H sp-$host -U root -P <password> $*
System serial number
for i in galaxy{25..30}; do serial=`ipmi $i fru | grep 'Product Serial' | head -n 2 | tail -n 1 | awk -F : '{print $2}' | sed 's| ||'` vamos_cmd -m host $i host.serial_number=$serial done
SP mac address
for i in galaxy{25..30}; do mac=`ipmi $i fru | grep 'Product Serial' | head -n 1 | awk -F ' : ' '{print $2}'` vamos_cmd -m host sp-$i interface.ether=$mac done
System mac address (first nic)
for i in galaxy{25..30}; do mac=`ipmi $i fru | grep 'Product Serial' | head -n 4 | tail -n 1 | awk -F ' : ' '{print $2}'` vamos_cmd -m host $i interface.ether=$mac done
Setting up SNMP traps
A passwordless root access to the SP helps a lot here...
ssh -l root sp-<host> << EOF cd /SP/alert/rules/1 set destination=141.34.32.57 set level=information exit EOF
RAID Controller Setup
During the boot hit Ctrl-C when the LSI RAID controller is initializing. Select the first (and only) adapter, then choose Create IS Volume. If you don't need the data on the disks you can ignore the warning. Change RAID disk for both disks to YES to create a RAID 0 stripe. Commit with C. After that leave the controller setup.
BIOS
This server's BIOS has very many options, and most have not been explored or even understood yet.
Some that matter:
Legacy USB (default: enabled)
Can be a problem under Linux if enabled (instability). If off, the keyboard (USB only, no PS/2 ports) will work in the BIOS, but not in the bootloader. This should probably be set to auto.Chipset -> SouthBridge Configuration -> Restore on AC/Power Loss
Make sure it's set to Power Off. Default was changed to Last State in Firmware 1.1Advanced -> Remote Access Configuration (default: 9600 baud on ttys0)
Make sure that serial redirection is enabled, and all the speed settings match (by default, all are 9600, which works but is slow):- serial redirection
- service processor serial port speed (external and internal)
- operating system parameters: grub and agetty
CF_CONMGR_TTY=ttyS0
CF_ConMgr_BaudRate=9600
System Serial Number Retrieval
Log into the SP as root, and run
-> show SYS/MB
Or use dmidecode. Or the web interface or ...